11 years in the market

Read every fault code your dealer can. On your phone.

A dealer scan tool costs upward of $2,000. GaragePro starts at $39.99 and reads the same control units.

Check your vehicle before you buy

Result opens in place. Nothing navigates away.

The GaragePro scanner plugged into a car's OBD port, with the app open on a phone

Plugs into the OBD port. Runs on the phone already in your hand.

No laptop, no subscription to a dealer network, no appointment.

11 years in the market
7,031,744 scans completed
2,000+ vehicle models covered
25,000+ garages and mechanics

Full module scanning

Watch it read every control unit

One tap queries the engine, ABS, airbags, power steering and body control in about two seconds, and tells you which ones have stored faults.

Full system scan Scan complete · 2.4s
  • Engine ECM P0301 · P0171 2 faults found
  • ABS ABS Clean
  • Airbags (SRS) SRS Clean
  • Power steering EPS Clean
  • Body control BCM B1318 1 fault found

RESULT

3

stored faults across 2 of 5 units

  • Engine P0301 · P0171
  • Body control B1318

5 control units read in 2.4 seconds · 3 stored faults across 2 units

Check your own vehicle

See it work

Watch one fault, start to finish

A real car in a real garage: plug in, read the code, clear it, verify the light is out. Sound off is fine — it's subtitled.

What it actually reads

Every control unit on the vehicle, not just the engine.

EngineABSAirbags (SRS)EPSBCMTransmissionHVACInstrument ClusterTraction Control
The nine diagnostic modes
  • Mode 01 Live sensor data while the engine runs
  • Mode 02 Freeze frame — conditions when the fault occurred
  • Mode 03 Stored fault codes
  • Mode 04 Clear codes and reset the check-engine light
  • Mode 05 Oxygen sensor test results
  • Mode 06 On-board monitoring test results
  • Mode 07 Pending codes from the current drive cycle
  • Mode 09 Vehicle identification and calibration IDs
  • Mode 0A Permanent codes that only a repair clears

How it compares

How it compares GarageProBlueDriver ProFIXDAutel AL329
Price $39.99 – $199.99, no subscription$139.95$59 + optional subscription$36.99
Modules read Engine, ABS, SRS, EPS, BCM and moreEngine, plus ABS, airbag and TPMS on 13 supported brandsEngine codesEngine only
Fault code clearing Unlimited, every moduleUnlimitedEngine codesEngine codes
Special functions Included on Advanced Plus — service reset, EPB retract, throttle adaptation, DPF regenNoneNoneNone
Subscription required No — one year or lifetime, your choiceNoOptional, for the full appNo
Vehicle classes Cars and bikesCars and light trucksCars and light trucksCars and light trucks
Vehicle coverage 2,000+ models tested by hand, strongest on Asian makesEnhanced data on 13 brandsGeneric OBD-IIGeneric OBD-II
Language support 19, including Spanish, German, French, Japanese and ArabicNot publishedNot published7
Warranty 12 months on manufacturing defects1 year1 year1 year
Where we are weaker Ships from India — 12 to 15 days, and the import duty is yours

Competitor prices and specifications read from each manufacturer's own website, September 2026. Where a page does not state something, this table says so rather than guessing.

How it works

01 Plug into the OBD port

Under the dash on the driver side. The extension cable reaches ports tucked behind trim.

02 Pair over Bluetooth

Open the GaragePro app and pair. No cable to the phone, no Wi-Fi needed in the bay.

03 Enter your activation code

The code card ships in the box. It pairs the device to your plan — keep it.

04 Scan and read

Every control unit, plain-English fault descriptions, and a clear when the repair is done.

Car owner

Scan before the mechanic tells you

Know the fault code, and roughly what it costs, before you hand over the keys.

Shop personal plans

Garage / professional

Unlimited scans, special functions, multi-vehicle

One tool across every car that comes through the bay, with the resets that finish the job.

For garages

If something goes wrong

12-month warranty on manufacturing defects

Counted from delivery. You ship the unit back at your cost, we ship the replacement at ours — this is not advance replacement.

Free worldwide shipping

We pay DHL Express to your door on every order, with no threshold. Tracking is emailed the moment DHL collects the parcel.

Import duties payable on delivery

Shipped DAP. Duties and local taxes are settled with the carrier, not with us.

WhatsApp and email support

Monday to Saturday, 10 AM – 7 PM IST (UTC+5:30).

Activation code in the box

Ships with the device. Support activates it with you if needed.

fix@carpm.in · Mon–Sat, 10 AM – 7 PM IST (UTC+5:30)

We pay the shipping. Import duty is yours.

DAP · delivered at place

Import duty and taxes are not included in the price

Shipping is on us. Import duty is not, and it is not in the price at checkout — your country charges it when the parcel arrives, the carrier or customs collects it directly from you, and we never see that money or have any say in the amount. What you pay depends on your country's rate for diagnostic equipment. Budget for it before you order.

Worldwide

12 – 15 days in transit

DHL Express, tracked door to door

After dispatch, plus any hold for duty

Shipping is free, worldwide

We pay DHL Express to your door on every order, whatever it costs us. There is no threshold and no shipping line at checkout.

Who collects the duty, and when

Your country's customs authority, through DHL. You are contacted before or at delivery and the parcel is held until it is paid.

If the duty is not paid

Returns and refunds are approved only after a delivery has succeeded. A parcel refused at customs is held, then returned to India or destroyed, and we are charged the duty on it as well — so a refused parcel is not cancelled and not refunded. Budget for the duty before you order; this is the one line on the page worth reading twice.

Tracking as soon as it is picked up

We add the DHL air waybill to your order the moment the parcel leaves us, and Shopify emails it to you automatically.

Dispatch in 3–5 working days

Your order leaves Gurgaon within three to five working days, then the transit clock above starts. The activation code is in the box, not emailed.

One parcel, one invoice

Multi-unit orders ship together with a single commercial invoice, which keeps a business buyer's import paperwork to one document.

Questions

Will it work on my car?

Check the make, model and year in the hero above. The answer comes from the GaragePro coverage record, and it says whether it is confirmed for the make or for your specific model.

Is this the same as a cheap ELM327 clone?

No. A clone reads engine codes only. GaragePro reads every control unit on the vehicle — ABS, airbags, power steering, body control and the rest — and clears faults on all of them.

Do I need a subscription?

Each plan is sold with its own validity options. What is on offer for a given plan is shown on that product page, read from the live catalogue.

What if my car is older?

Vehicles built before the OBD-II mandate in this market have no diagnostic port for the scanner to talk to. The compatibility check flags that for your exact year rather than letting you find out after delivery.

Can I use it on more than one vehicle?

Lite covers two vehicles that you pick in the app. Standard and Advanced cover every vehicle.

What are special functions?

The resets and calibrations that finish a repair — service reset, electronic parking brake retract, DPF regeneration, throttle adaptation and more. They are on Advanced only, and the compatibility check returns the count for your vehicle.

Does it need internet in the workshop?

The scan runs over Bluetooth. Internet is needed only for activation and for updates.

How long does delivery take?

Dispatched within 3–5 working days. Delivery time depends on where you are — the shipping policy has the detail.

What GaragePro does not do

No ECU programming. No key coding. If your job needs either of those, this is not the tool — and we would rather tell you now than process a return.